[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ET) NEED E-15 Traction motor profile to program Sepex controller (1268)



I think it depends on how much you want to optimize things.  Bear in mind 
that the later ET PM motors didn't (couldn't) have field weakening.

If memory serves, and it might not as it's been many years, Mark Hanson 
ran 
an E15 with full field and 48 volts from his own homebrew PWM armature 
controller.  I think he got about the same top speed as on 36 volts with 
the factory field weakening.  He had a second controller to drop the 48 
volts to 36 volts for the attachments.  If he's still on the list, maybe 
he'll chime in with comments and corrections.


David Roden - 25 Years with ETs

= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = 
Note: mail sent to the "etpost" address will not reach me.  To send 
me a private message, please use the address shown at the bottom
of this page : http://www.evdl.org/help/
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =