[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ET) Motor trouble

Could be a loose brush lead inside, a brush stuck in it's holder, a brush lead burned off at the terminal due to the screw securing it coming loose.....................


And then there's the armature. :(

Yup, it's the two large terminals.

RJ

Steve Gaarder wrote: 
On Mon, 26 Jan 2009, Konstanty, Walter (GE Indust, ConsInd) wrote:

  
If you are getting 36V at start, the field is not getting power or is
bad.....
    
I would think that if I'm getting 36V on the *armature* at start then it's 
the armature that's bad, or am I missing something?

thanks,

Steve

p.s.  I assume that the two large bolts with the heavy (#6 or so) wire are 
the armature.

_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak