Re: (ET) steering stuff

["steves" <ssawtelle fcc net>]

E12S and lower (I think) are single pulley. If it's an E12S motor , then I
think it's the same as an E15 motor.

The ET tiller uses the same motor as the snowblower but reversed direction
(I think). It's a series motor. I don't know the answer to this but what is
better for a tiller - series or shunt, and why?

- SteveS


----- Original Message ----- 
From: "Christopher Zach" <czach computer org>
To: "neil" <wombat dssinternet net>
Cc: <>
Sent: Thursday, June 17, 2004 9:30 AM
Subject: Re: (ET) steering stuff


> If it has a thermal switch it might be an E20 motor. Still, why only one
> drive pulley? This is the second time I've heard of this (one pulley and
> belt) were all E15's single belt drive with the only dual belt being the
> E20?
>
> How much for it? I'd be interested for a future tiller conversion.
>
> Chris
>
>
> neil wrote:
>
> > Sorry, everyone, the two gear sets I've got are gone, Steve and  Marcus
> > were first in..  I don't have any decals for the panels that are any
> > good, the panel I have is a piece of moded plastic with words cast in,
> > all black now, used to have white painted lettering.
> > Have a drive motor  from the e-15, (not checked yet) and  one from an
> > unknown model.  This is about 4" dia and 16" long with single drive
> > pulley, it runs ok on 12 volts.. Has a heavy red and black wire plus a
> > couple light gage wires, maybe thermal switch.
> >
> > wombat
> >
> > _______________________________________________
> > Elec-trak mailing list
> > Elec-trak cosmos phy tufts edu
> > https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
> >
> >
>
>
> _______________________________________________
> Elec-trak mailing list
> Elec-trak cosmos phy tufts edu
> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
>
>