[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ET) stuff to move
Got it. I may be interested! More later.
C. WeinreichNW Iowa
On Monday, May 4, 2026 at 12:57:02 PM CDT, Dean Stuckmann via
Elec-trak <elec-trak cosmos phy tufts edu> wrote:
Hi,
I've been catching up on some of the emails regarding parts and have
decided to start moving some of my “spare” stuff. I started with
Elec-Traks in 1980 and have amassed lots of spares over the years that I’m
ready to part with now that I’m 70. I’m guessing that everything in this
list should get new bearings.
- E15 that went thru all the motor speeds when jumped from one of my other
ETs.
- 6 mower decks including one belly mower
- 2 snow blowers including one with center motor
- 1 tiller but no brackets, mount or lift. I do have brackets for my other
tiller that it would be used as a template for somebody if they needed to
make them. The rear ET lift is painfully slow, so I think you're better
off using a small winch for that task anyway.
- Powered lawn sweeper but basket need re-sewing
- various motors and electrics from dismantled machines.
I’m guessing that everything in this list should get new bearings.
If anything is of interest email me directly. Thanks
Regards,
Dean Stuckmann
5432 County Road U
Newton, WI 53063-9624
920-901-2288
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://cosmos.phy.tufts.edu/mhonarc/elec-trak/attachments/20260504/754495d9/attachment.htm>
_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://cosmos.phy.tufts.edu/mhonarc/elec-trak/attachments/20260511/66a4e265/attachment.htm>