[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ET) Front hold down
Hi,
I have acquired numerous ETs over the last 45 years and I think only two
had the front hold down installed. And yes, there is a gap. My guess is
that the hold-down is just there to keep the batteries in place in the
unlikely event of a rollover, so they were never meant to touch the
batteries or the plastic battery cover.
At least one of my tractors came with the rear battery hold-downs. A piece
of about 1/2” angle iron that were on each end of the battery box, or ran
a full length from front to back, depending on the tractor. For instance,
I can see the holes for the hold-downs in the front and rear of the
battery box of my I-5, E15, E16 and ETG150. However, one of the hold-downs
I have is made to fit in a slot in one end of the box and a bolt in the
other. https://www.myelec-traks.com/GEF-4374A.pdf
Regards,
Dean Stuckmann
5432 County Road U
Newton, WI 53063-9624
920-901-2288
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://cosmos.phy.tufts.edu/mhonarc/elec-trak/attachments/20250401/2930d42a/attachment.htm>