On Mon, 31 Jul 2006, Perry Cain wrote:
Check both sides of your cards, and look very carefully for solder traces that have burned off or cracked. I had the exact problem, and it was a solder trace that had burned.
Thanks Perry, I've started poking around on card 1 after finding some threads in the archives from people who had a similar problem, and found it was due to a bad connection at card 1 where the forward/reverse relay connects to it. Just need to figure out where it makes that connection. :) Unfortunately I haven't found on the schematics what number connection on the card connects to the forward/reverse relay. I suppose I could just go through all of the connectors and clean them up....
Mike